Idea
In short
How do you build a binary clock?
A clock chip and two shift registers show the hours, minutes and seconds as rows of lit LEDs, a good way to learn binary at a glance. You need Arduino Nano, DS3231 RTC module, 74HC595 shift register module (8 outputs) × 2, LED 5 mm green × 8, LED 5 mm red × 8, Resistor 330 Ω × 16 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Show the time in binary.
Parts list
- Development Boards
- Sensors
- Interfaces
- SemiconductorsLED 5 mm green × 8
- SemiconductorsLED 5 mm red × 8
- PassivesResistor 330 Ω × 16
- Prototyping
How to build it
- Wire the two shift registers in a chain
- Read the time
- Split it into hours, minutes and seconds
- Send the bits to the LEDs
- Add a button to switch to a decimal test mode
Related projects
Common questions
What parts do I need for the binary clock?
Arduino Nano, DS3231 RTC module, 74HC595 shift register module (8 outputs) × 2, LED 5 mm green × 8, LED 5 mm red × 8, Resistor 330 Ω × 16 and Breadboard 830 Tie Points.
How long does the binary clock take to build?
About 210 minutes for a intermediate maker.
