Idea
In short
How do you build a panel-mount status lights?
Four LEDs in panel bezels show power, activity, warning and error states for a small project box. You need Arduino Nano, LED holder / bezel 5 mm × 4, LED 5 mm red × 2, LED 5 mm green × 2, Resistor 330 Ω × 4 and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 90 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a status panel.
Parts list
- Development Boards
- Optoelectronics
- SemiconductorsLED 5 mm red × 2
- SemiconductorsLED 5 mm green × 2
- PassivesResistor 330 Ω × 4
- Prototyping
How to build it
- Drill the panel
- Fit the bezels
- Wire the LEDs
- Show four states
- Write a legend label
Related projects
Common questions
What parts do I need for the panel-mount status lights?
Arduino Nano, LED holder / bezel 5 mm × 4, LED 5 mm red × 2, LED 5 mm green × 2, Resistor 330 Ω × 4 and Breadboard 830 Tie Points.
How long does the panel-mount status lights take to build?
About 90 minutes for a beginner maker.
