74HC595 shift register module (8 outputs)
Shift register on a board with headers.
Function8-bit shift register
Supply voltage2 to 6 V
InterfaceData, clock, latch
InterfacesReviewedMPN 74HC595 moduleUsed in 3 projects
In short
What is the 74HC595 shift register module (8 outputs) and what is it used for?
Shift register on a board with headers. Makers use it for LED rows, relays.
How it works
Bits shift in on each clock and the latch copies them to the output pins together.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | 8-bit shift register |
| Supply voltage | 2 to 6 V |
| Interface | Data, clock, latch |
Pinout
SERSerial data
SRCLKShift clock
RCLKLatch
OELow to enable outputs
SRCLRHigh (clear when low)
QA to QHOutputs
QH'Chain to the next module
How to use it
Use shiftOut() then pulse RCLK to update all eight outputs at once. Keep each output to about 6 mA and the whole chip under 70 mA. Chain modules for more outputs.
Applications
LED rowsrelays
Builds that use it
Alternatives
- 74HC595 Shift RegisterBare chip
- MCP23017 I/O expander moduleInputs and outputs over I2C
Common questions
What is the 74HC595 shift register module (8 outputs) used for?
In maker projects: LED rows, relays.
How does the 74HC595 shift register module (8 outputs) work?
Bits shift in on each clock and the latch copies them to the output pins together.
What voltage does the 74HC595 shift register module (8 outputs) need?
2 to 6 V.
How do I connect the 74HC595 shift register module (8 outputs) to an Arduino or ESP32?
Data, clock, latch. Pins: SER (Serial data), SRCLK (Shift clock), RCLK (Latch), OE (Low to enable outputs), SRCLR (High (clear when low)), QA to QH (Outputs).
What can I use instead of the 74HC595 shift register module (8 outputs)?
74HC595 Shift Register and MCP23017 I/O expander module.
