Idea
In short
How do you build a current-limit lab on a bench supply?
Use a bench supply's current limit safely: see how a short circuit is held to a small current and how the limit protects parts. You need Adjustable bench power supply module (DPS5005), Resistor 220 Ω, LED 5 mm red, Resistor 1 kΩ, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use current limiting.
Parts list
- Power
- Passives
- Semiconductors
- Passives
- Tools & Instruments
- Prototyping
How to build it
- Set the voltage first
- Set a low current limit
- Power an LED
- Create a safe overload
- Watch the supply drop into limiting
Common questions
What parts do I need for the current-limit lab on a bench supply?
Adjustable bench power supply module (DPS5005), Resistor 220 Ω, LED 5 mm red, Resistor 1 kΩ, Digital multimeter and Breadboard 830 Tie Points.
How long does the current-limit lab on a bench supply take to build?
About 120 minutes for a beginner maker.
