Projects / Ideas / Public air quality display board

Public air quality display board

IntermediateDisplaysIdeaReviewed
In short

How do you build a public air quality display board?

A large LED board outside a school shows PM2.5 and a colour code so parents can see the air quality. You need ESP32 DevKit V1, PMS5003 particulate matter sensor, P10 LED matrix panel (32x16, red) × 2, SMPS 12 V 5 A (metal case) and Waterproof enclosure IP65 (junction box).

Level
Intermediate
Time
About 240 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Turn a sensor reading into a clear public display.

How to build it

  1. Read PM2.5 every minute
  2. Average over 15 minutes
  3. Show the number and Good, Moderate or Poor
  4. Log to the cloud
  5. Put the sensor in a shaded, ventilated spot

Related projects

Common questions

What parts do I need for the public air quality display board?

ESP32 DevKit V1, PMS5003 particulate matter sensor, P10 LED matrix panel (32x16, red) × 2, SMPS 12 V 5 A (metal case) and Waterproof enclosure IP65 (junction box).

How long does the public air quality display board take to build?

About 240 minutes for a intermediate maker.