Idea
In short
How do you build a bridge signal amplifier lab?
An instrumentation amplifier lifts a tiny bridge voltage so the Uno can read it, with the gain set by one resistor. You need Arduino Nano, AD620 instrumentation amplifier, Resistor 1 kΩ, Potentiometer 10 kΩ × 2, 5 V 2 A USB adapter, 9 V battery × 2, 9 V battery snap with DC jack × 2 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Amplify a small signal.
Parts list
- Development Boards
- Integrated Circuits
- Passives
- Passives
- Power
- Batteries9 V battery × 2
- Power
- Prototyping
How to build it
- Read the gain formula
- Wire the amplifier on a dual supply
- Build a small pot bridge
- Measure the output
- Log gain against the resistor
Common questions
What parts do I need for the bridge signal amplifier lab?
Arduino Nano, AD620 instrumentation amplifier, Resistor 1 kΩ, Potentiometer 10 kΩ × 2, 5 V 2 A USB adapter, 9 V battery × 2, 9 V battery snap with DC jack × 2 and Breadboard 830 Tie Points.
How long does the bridge signal amplifier lab take to build?
About 270 minutes for a intermediate maker.
