Idea
In short
How do you build a sallen-Key low-pass filter lab?
Build a second-order filter and compare its roll-off with a plain RC. You need TL072 dual JFET op-amp, Resistor 10 kΩ × 2, Ceramic capacitor 10 nF × 2, Breadboard 830 Tie Points, 9 V battery × 2 and 9 V battery snap with DC jack.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Design a simple active filter.
Parts list
- Integrated Circuits
- PassivesResistor 10 kΩ × 2
- Passives
- Prototyping
- Batteries9 V battery × 2
- Power
How to build it
- Choose a cut-off
- Pick matching resistors and capacitors
- Sweep frequency
- Plot gain
- Compare with RC
Related projects
Common questions
What parts do I need for the sallen-Key low-pass filter lab?
TL072 dual JFET op-amp, Resistor 10 kΩ × 2, Ceramic capacitor 10 nF × 2, Breadboard 830 Tie Points, 9 V battery × 2 and 9 V battery snap with DC jack.
How long does the sallen-Key low-pass filter lab take to build?
About 240 minutes for a intermediate maker.
