Idea
In short
How do you build a large-button communication board?
Four large arcade-style buttons trigger spoken words or sounds for people who find small buttons hard to press. You need Arduino Uno R3, Tactile push button 6 mm × 4, MAX98357A I2S amplifier breakout, MicroSD Card Module, Resistor 10 kΩ × 4 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build an accessible input device.
Parts list
- Development Boards
- Switches
- Audio
- Interfaces
- PassivesResistor 10 kΩ × 4
- Prototyping
How to build it
- Mount four large buttons
- Read them with debouncing
- Play a recorded word for each
- Add a volume control
- Test with the user and adjust
Common questions
What parts do I need for the large-button communication board?
Arduino Uno R3, Tactile push button 6 mm × 4, MAX98357A I2S amplifier breakout, MicroSD Card Module, Resistor 10 kΩ × 4 and Breadboard 830 Tie Points.
How long does the large-button communication board take to build?
About 270 minutes for a intermediate maker.
