Lab / Virtual lab / AC and filters

Series RLC resonance

Find the resonant frequency where the current peaks, and the bandwidth and Q.

AC and filtersSimulatedFull experiment write-up →

Circuit

Updates as you change values
1 VL 10 mHC 100 nFR100 Ω

A 1 V sine into a series R, L and C; read the current with a resistor and the CRO.

Controls

Changing any setting except frequency starts a new set of readings.

Meters

Current2.81 mA
Phase73.7 °

Graph

0 readings

Your graph appears here

Take readings, or press Auto sweep to log a full set.

your readings

Theory

  • f0 = 1 / (2π √(LC)): there XL = XC and Z = R
  • Z = √(R² + (XL − XC)²), XL = 2πfL, XC = 1 / (2πfC)
  • Q = (1/R) √(L/C) = 2πf0L / R
  • Bandwidth BW = f2 − f1 = f0 / Q = R / (2πL), at I = Imax / √2
  • At f0 the voltage across L (and C) is Q times the supply

Worked out for your values

Resonant f0
5.033 kHz
Quality factor Q
3.16
Bandwidth
1.592 kHz
Peak current V/R
10 mA
XL now
188.5 Ω
XC now
530.5 Ω
Voltage across L at f0
3.162 V

Your result

Worked out from your readings and compared with theory.

f0 at the current peak

Take readings on both sides of the peak.

Peak current

Take readings on both sides of the peak.

Bandwidth f2 − f1 (half-power points)

Take readings past both half-power points (0.707 × peak).

Sources of error

  • Coil winding resistance adds to R, lowering Q and the peak
  • Generator output resistance
  • Finding the exact peak on the CRO by eye