Resonance in series and parallel RLC circuits
To find the resonant frequency, bandwidth and Q factor of a series RLC circuit (and observe the parallel case).
Theory
In a series RLC circuit the reactances cancel at f0 = 1 / (2π√(LC)), the impedance is just R and the current is maximum. The bandwidth is the range between the half-power frequencies (current = Imax/√2), BW = R / (2πL), and Q = f0 / BW. A parallel RLC circuit has maximum impedance (minimum current) at resonance.
Apparatus
- Function generator
- Resistor 100 Ω
- Inductor 10 mH
- Capacitor 0.1 µF
- CRO or AC voltmeter
Circuit connections
- Generator → R → L → C → ground; measure the voltage across R (proportional to current)
Procedure
Pre-lab check
4 questions · 75% to be readyTry the readings before the lab
| f (Hz) | |Z| (Ω) | I (mA) | VR (V) |
|---|---|---|---|
| 1510 | 964.4 | 5.18 | 0.518 |
| 2516 | 484.8 | 10.31 | 1.031 |
| 3523 | 251.2 | 19.91 | 1.991 |
| 4278 | 143.7 | 34.79 | 3.479 |
| 4781 | 105.1 | 47.56 | 4.756 |
| 5033 | 100 | 50 | 5 |
| 5285 | 104.7 | 47.78 | 4.778 |
| 6040 | 153.1 | 32.66 | 3.266 |
| 7549 | 281.9 | 17.74 | 1.774 |
| 10066 | 484.8 | 10.31 | 1.031 |
| 15099 | 849.2 | 5.89 | 0.589 |
Precautions
- Keep the generator output constant at every frequency.
- Take more readings near resonance.
My readings
Type what you measured. It goes into your record book, and to My Garage when you are signed in.
| S. No. | f (Hz) | |Z| (Ω) | I (mA) | VR (V) |
|---|---|---|---|---|
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 4 | ||||
| 5 | ||||
| 6 |
Check my readings
Put the value you set in the first column, then compare. Real parts have tolerance.
Your lab record
Everything above is free. The print-ready write-up comes with Maker.
Printed pages leave the observation table empty for your own readings.
Viva practice
Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.
Quick answers for your record and viva
What is the aim of the resonance in series and parallel rlc circuits experiment?
To find the resonant frequency, bandwidth and Q factor of a series RLC circuit (and observe the parallel case).
What apparatus is needed for resonance in series and parallel rlc circuits?
Function generator, Resistor 100 Ω, Inductor 10 mH, Capacitor 0.1 µF, CRO or AC voltmeter.
What is the theory behind resonance in series and parallel rlc circuits?
In a series RLC circuit the reactances cancel at f0 = 1 / (2π√(LC)), the impedance is just R and the current is maximum. The bandwidth is the range between the half-power frequencies (current = Imax/√2), BW = R / (2πL), and Q = f0 / BW. A parallel RLC circuit has maximum impedance (minimum current) at resonance.
What result should I get in resonance in series and parallel rlc circuits?
f0 = ___ Hz (theory ___ Hz), bandwidth = ___ Hz, Q = ___.
What precautions should I take in resonance in series and parallel rlc circuits?
Keep the generator output constant at every frequency. Take more readings near resonance.
