Zener diode characteristics and voltage regulator
To plot the reverse characteristics of a Zener diode, find its breakdown voltage, and use it as a voltage regulator.
- Zener diode (e.g. 5.1 V, 0.5 W)
- Resistor 1 kΩ (series)
- Load resistors
- DC supply 0–15 V
- Voltmeter and milliammeter
Theory
A Zener diode is heavily doped so that in reverse bias it breaks down at a sharp, stable voltage Vz. Beyond breakdown the voltage stays almost constant over a wide range of current, so a series resistor and a Zener make a simple regulator: Is = (Vin − Vz)/Rs, shared between the Zener and the load.
Read the lesson: Diodes protection ›- Supply + → Rs (1 kΩ) → Zener cathode; Zener anode → supply −; voltmeter across the Zener; load in parallel for the regulator part
Procedure
Pre-lab check
4 questions · 75% to be readyTry the readings before the lab
| Vin (V) | Vout (V) | Iz (mA) |
|---|---|---|
| 2 | 1.99 | 0.01 |
| 4 | 3.98 | 0.02 |
| 6 | 5.106 | 0.89 |
| 8 | 5.12 | 2.88 |
| 10 | 5.134 | 4.87 |
| 12 | 5.148 | 6.85 |
| 14 | 5.162 | 8.84 |
Precautions
- Do not exceed the Zener's power rating: P = Vz × Iz.
- Keep the series resistor in circuit at all times.
My readings
Type what you measured. It goes into your record book, and to My Garage when you are signed in.
| S. No. | Vin (V) | Vout (V) | Iz (mA) |
|---|---|---|---|
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 |
Check my readings
Put the value you set in the first column, then compare. Real parts have tolerance.
Breakdown voltage Vz = ___ V. The output stays near ___ V as the input changes from ___ to ___ V; % regulation = ___.
Everything above is free. The print-ready write-up comes with Maker.
Printed pages leave the observation table empty for your own readings.
Viva questions
Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.
Quick answers for your record and viva
What is the aim of the zener diode characteristics and voltage regulator experiment?
To plot the reverse characteristics of a Zener diode, find its breakdown voltage, and use it as a voltage regulator.
What apparatus is needed for zener diode characteristics and voltage regulator?
Zener diode (e.g. 5.1 V, 0.5 W), Resistor 1 kΩ (series), Load resistors, DC supply 0–15 V, Voltmeter and milliammeter.
What is the theory behind zener diode characteristics and voltage regulator?
A Zener diode is heavily doped so that in reverse bias it breaks down at a sharp, stable voltage Vz. Beyond breakdown the voltage stays almost constant over a wide range of current, so a series resistor and a Zener make a simple regulator: Is = (Vin − Vz)/Rs, shared between the Zener and the load.
What result should I get in zener diode characteristics and voltage regulator?
Breakdown voltage Vz = ___ V. The output stays near ___ V as the input changes from ___ to ___ V; % regulation = ___.
What precautions should I take in zener diode characteristics and voltage regulator?
Do not exceed the Zener's power rating: P = Vz × Iz. Keep the series resistor in circuit at all times.
