Lab / RGPV / Electronic devices / Experiment 1

V-I characteristics of a PN junction diode

Electronic devicesVirtual readings4 viva questionsRecord book ready
Open virtual bench
Aim

To plot the forward and reverse V-I characteristics of a silicon PN junction diode and find its cut-in voltage and static and dynamic resistance.

Apparatus
  • Diode 1N4007
  • Resistor 1 kΩ
  • DC supply 0–15 V
  • Voltmeter
  • Milliammeter and microammeter

Theory

In forward bias the current stays tiny until the cut-in voltage (about 0.6–0.7 V for silicon, 0.2–0.3 V for germanium) and then rises exponentially: I = Is(e^(V/ηVT) − 1). In reverse bias only a small saturation current flows until breakdown. Static resistance is V/I at a point; dynamic resistance is ΔV/ΔI on the curve.

Read the lesson: Diodes protection ›
Circuit connections
  • Forward: supply + → 1 kΩ → milliammeter → anode; cathode → supply −; voltmeter across the diode
  • Reverse: turn the diode round and use the microammeter

Procedure

Pre-lab check

4 questions · 75% to be ready
1What is cut-in (knee) voltage?
2Why is reverse current small?
3What is the depletion region?
4How does a photodiode differ?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
Dynamic resistance at 10 mA ≈ ηVT / I4.7 Ω
08.116243200.190.380.560.75V (V)I (mA)
V (V)I (mA)Static R (Ω)
00–
0.20.0002918593
0.40.016224635
0.50.13933590
0.550.4081348
0.61.1948502
0.653.4994186
0.710.248868
0.7530.016125

Precautions

  • Always use the series resistor; a diode alone across a supply burns out.
  • Do not exceed the diode's maximum forward current.
  • Use a microammeter for reverse current.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.V (V)I (mA)Static R (Ω)
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book
Result

Cut-in voltage = ___ V. Static resistance at ___ mA = ___ Ω; dynamic resistance = ___ Ω. Reverse current is in µA up to ___ V.

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva questions

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. What is cut-in (knee) voltage?
2. Why is reverse current small?
3. What is the depletion region?
4. How does a photodiode differ?

Quick answers for your record and viva

What is the aim of the v-i characteristics of a pn junction diode experiment?

To plot the forward and reverse V-I characteristics of a silicon PN junction diode and find its cut-in voltage and static and dynamic resistance.

What apparatus is needed for v-i characteristics of a pn junction diode?

Diode 1N4007, Resistor 1 kΩ, DC supply 0–15 V, Voltmeter, Milliammeter and microammeter.

What is the theory behind v-i characteristics of a pn junction diode?

In forward bias the current stays tiny until the cut-in voltage (about 0.6–0.7 V for silicon, 0.2–0.3 V for germanium) and then rises exponentially: I = Is(e^(V/ηVT) − 1). In reverse bias only a small saturation current flows until breakdown. Static resistance is V/I at a point; dynamic resistance is ΔV/ΔI on the curve.

What result should I get in v-i characteristics of a pn junction diode?

Cut-in voltage = ___ V. Static resistance at ___ mA = ___ Ω; dynamic resistance = ___ Ω. Reverse current is in µA up to ___ V.

What precautions should I take in v-i characteristics of a pn junction diode?

Always use the series resistor; a diode alone across a supply burns out. Do not exceed the diode's maximum forward current. Use a microammeter for reverse current.

V-I characteristics of a PN junction diode: lab experiment