Lab / MAKAUT / Electronic devices / Experiment 2

Zener diode characteristics and voltage regulator

Electronic devicesVirtual readings4 viva questionsRecord book ready
Open virtual bench
Aim

To plot the reverse characteristics of a Zener diode, find its breakdown voltage, and use it as a voltage regulator.

Apparatus
  • Zener diode (e.g. 5.1 V, 0.5 W)
  • Resistor 1 kΩ (series)
  • Load resistors
  • DC supply 0–15 V
  • Voltmeter and milliammeter

Theory

A Zener diode is heavily doped so that in reverse bias it breaks down at a sharp, stable voltage Vz. Beyond breakdown the voltage stays almost constant over a wide range of current, so a series resistor and a Zener make a simple regulator: Is = (Vin − Vz)/Rs, shared between the Zener and the load.

Read the lesson: Diodes protection ›
Circuit connections
  • Supply + → Rs (1 kΩ) → Zener cathode; Zener anode → supply −; voltmeter across the Zener; load in parallel for the regulator part

Procedure

Pre-lab check

4 questions · 75% to be ready
1How does a Zener diode differ from a normal diode?
2Name the two breakdown mechanisms.
3Why is a series resistor needed?
4What is load regulation?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
% line regulation (10 → 14 V)0.55 %
01.392.794.185.572581114Vin (V)Vout (V)
Vin (V)Vout (V)Iz (mA)
21.990.01
43.980.02
65.1060.89
85.122.88
105.1344.87
125.1486.85
145.1628.84

Precautions

  • Do not exceed the Zener's power rating: P = Vz × Iz.
  • Keep the series resistor in circuit at all times.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.Vin (V)Vout (V)Iz (mA)
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book
Result

Breakdown voltage Vz = ___ V. The output stays near ___ V as the input changes from ___ to ___ V; % regulation = ___.

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva questions

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. How does a Zener diode differ from a normal diode?
2. Name the two breakdown mechanisms.
3. Why is a series resistor needed?
4. What is load regulation?

Quick answers for your record and viva

What is the aim of the zener diode characteristics and voltage regulator experiment?

To plot the reverse characteristics of a Zener diode, find its breakdown voltage, and use it as a voltage regulator.

What apparatus is needed for zener diode characteristics and voltage regulator?

Zener diode (e.g. 5.1 V, 0.5 W), Resistor 1 kΩ (series), Load resistors, DC supply 0–15 V, Voltmeter and milliammeter.

What is the theory behind zener diode characteristics and voltage regulator?

A Zener diode is heavily doped so that in reverse bias it breaks down at a sharp, stable voltage Vz. Beyond breakdown the voltage stays almost constant over a wide range of current, so a series resistor and a Zener make a simple regulator: Is = (Vin − Vz)/Rs, shared between the Zener and the load.

What result should I get in zener diode characteristics and voltage regulator?

Breakdown voltage Vz = ___ V. The output stays near ___ V as the input changes from ___ to ___ V; % regulation = ___.

What precautions should I take in zener diode characteristics and voltage regulator?

Do not exceed the Zener's power rating: P = Vz × Iz. Keep the series resistor in circuit at all times.

Zener diode characteristics and voltage regulator