Tools / Inductive Reactance

How to work out inductive reactance

An inductor passes DC easily but resists fast changes in current. Its reactance rises in step with frequency.

XL = 2πfL

Inputs

Hz
mH

Results update as you type. Prefixes work: 4.7k, 100u, 10n.

Result
Reactance
62.83 Ω
What this leaves out
  • Ideal inductor; saturation, winding resistance, self-resonance and core losses excluded.
Step by step

The working with your numbers

  1. Change millihenries to henriesL = 10 mH ÷ 1000 = 0.01 H
  2. ReactanceXL = 2π × f × L = 6.283 × 1,000 × 0.01 = 62.8 Ω
See it

Reactance rises with frequency

1 Ω10 Ω100 Ω1 kΩ10 Hz100 Hz1 kHz10 kHz100 kHzFrequency62.8 Ω
Reactance against frequency. Ten times the frequency gives ten times the reactance.

Does the answer make sense?

  • OK: Double the frequency and XL doubles, to 126 Ω.
  • OK: At DC an ideal inductor is 0 Ω. A real one has the resistance of its wire, listed as DCR on the datasheet.
  • OK: Current in an inductor lags the voltage by 90°, the opposite of a capacitor.

Common mistakes

  • Leaving L in mH or µH. The formula needs henries.
  • Forgetting that real inductors saturate. Above the rated current the inductance drops sharply.
  • Ignoring the coil's own resistance when working out a DC voltage drop or heat.

Learn it, try it, build it

Calculated, not measured. Check the exact part datasheet and your real circuit before powering anything.

Just need the number? Use the inductive reactance calculator on Geekobot.

Common questions

How do you calculate inductive reactance?

XL = 2π × f × L with f in hertz and L in henries. A 10 mH inductor at 1 kHz is 6.283 × 1,000 × 0.01 ≈ 62.8 Ω.

Why does an inductor block high frequencies?

Its reactance rises with frequency, so fast signals see a high impedance while DC passes. That is how a choke keeps switching noise off a supply line.