V-I characteristics of a PN junction diode
To plot the forward and reverse V-I characteristics of a silicon PN junction diode and find its cut-in voltage and static and dynamic resistance.
- Diode 1N4007
- Resistor 1 kΩ
- DC supply 0–15 V
- Voltmeter
- Milliammeter and microammeter
Theory
In forward bias the current stays tiny until the cut-in voltage (about 0.6–0.7 V for silicon, 0.2–0.3 V for germanium) and then rises exponentially: I = Is(e^(V/ηVT) − 1). In reverse bias only a small saturation current flows until breakdown. Static resistance is V/I at a point; dynamic resistance is ΔV/ΔI on the curve.
Read the lesson: Diodes protection ›- Forward: supply + → 1 kΩ → milliammeter → anode; cathode → supply −; voltmeter across the diode
- Reverse: turn the diode round and use the microammeter
Procedure
Pre-lab check
4 questions · 75% to be readyTry the readings before the lab
| V (V) | I (mA) | Static R (Ω) |
|---|---|---|
| 0 | 0 | – |
| 0.2 | 0.0002 | 918593 |
| 0.4 | 0.0162 | 24635 |
| 0.5 | 0.1393 | 3590 |
| 0.55 | 0.408 | 1348 |
| 0.6 | 1.1948 | 502 |
| 0.65 | 3.4994 | 186 |
| 0.7 | 10.2488 | 68 |
| 0.75 | 30.0161 | 25 |
Precautions
- Always use the series resistor; a diode alone across a supply burns out.
- Do not exceed the diode's maximum forward current.
- Use a microammeter for reverse current.
My readings
Type what you measured. It goes into your record book, and to My Garage when you are signed in.
| S. No. | V (V) | I (mA) | Static R (Ω) |
|---|---|---|---|
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 |
Check my readings
Put the value you set in the first column, then compare. Real parts have tolerance.
Cut-in voltage = ___ V. Static resistance at ___ mA = ___ Ω; dynamic resistance = ___ Ω. Reverse current is in µA up to ___ V.
Everything above is free. The print-ready write-up comes with Maker.
Printed pages leave the observation table empty for your own readings.
Viva questions
Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.
Quick answers for your record and viva
What is the aim of the v-i characteristics of a pn junction diode experiment?
To plot the forward and reverse V-I characteristics of a silicon PN junction diode and find its cut-in voltage and static and dynamic resistance.
What apparatus is needed for v-i characteristics of a pn junction diode?
Diode 1N4007, Resistor 1 kΩ, DC supply 0–15 V, Voltmeter, Milliammeter and microammeter.
What is the theory behind v-i characteristics of a pn junction diode?
In forward bias the current stays tiny until the cut-in voltage (about 0.6–0.7 V for silicon, 0.2–0.3 V for germanium) and then rises exponentially: I = Is(e^(V/ηVT) − 1). In reverse bias only a small saturation current flows until breakdown. Static resistance is V/I at a point; dynamic resistance is ΔV/ΔI on the curve.
What result should I get in v-i characteristics of a pn junction diode?
Cut-in voltage = ___ V. Static resistance at ___ mA = ___ Ω; dynamic resistance = ___ Ω. Reverse current is in µA up to ___ V.
What precautions should I take in v-i characteristics of a pn junction diode?
Always use the series resistor; a diode alone across a supply burns out. Do not exceed the diode's maximum forward current. Use a microammeter for reverse current.
