Lab / GTU / Digital electronics / Experiment 6

Counters: asynchronous, synchronous and decade

Digital electronicsVirtual readings4 viva questionsRecord book ready
Aim

To build a mod-N counter with flip-flops (or a decade counter IC) and verify its count sequence.

Apparatus
  • ICs 7476 (JK), 7490 (decade counter), 7400
  • Digital trainer kit
  • LEDs or a 7-segment display with decoder
ABY

Theory

A ripple (asynchronous) counter clocks each flip-flop from the previous one's output, so it is simple but slow. A synchronous counter clocks all flip-flops together. A mod-N counter resets to 0 when the count reaches N, using a NAND gate on the bits that are 1 at N to drive the clear inputs. The 7490 counts 0–9 when its QA output feeds the B clock input.

Read the lesson: Flip flops counters ›
Circuit connections
  • Ripple: clock into the first JK (J = K = 1); each Q into the next flip-flop's clock
  • Mod-N: NAND of the outputs that are 1 at N, into all clear inputs

Procedure

Pre-lab check

4 questions · 75% to be ready
1What is the modulus of a counter?
2How many flip-flops for a mod-10 counter?
3Why is a synchronous counter faster?
4What is a ring counter?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
ClockQ3Q2Q1Q0Count
000000
100011
200102
300113
401004
501015
601106
701117
810008
910019
1000000

Precautions

  • Use a slow clock (1 Hz) to see each state.
  • Tie unused clear and preset inputs high.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.ClockQ3Q2Q1Q0Count
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book
Result

The counter counts from 0 to ___ and resets to 0 on the ___th pulse.

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva questions

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. What is the modulus of a counter?
2. How many flip-flops for a mod-10 counter?
3. Why is a synchronous counter faster?
4. What is a ring counter?

Quick answers for your record and viva

What is the aim of the counters: asynchronous, synchronous and decade experiment?

To build a mod-N counter with flip-flops (or a decade counter IC) and verify its count sequence.

What apparatus is needed for counters: asynchronous, synchronous and decade?

ICs 7476 (JK), 7490 (decade counter), 7400, Digital trainer kit, LEDs or a 7-segment display with decoder.

What is the theory behind counters: asynchronous, synchronous and decade?

A ripple (asynchronous) counter clocks each flip-flop from the previous one's output, so it is simple but slow. A synchronous counter clocks all flip-flops together. A mod-N counter resets to 0 when the count reaches N, using a NAND gate on the bits that are 1 at N to drive the clear inputs. The 7490 counts 0–9 when its QA output feeds the B clock input.

What result should I get in counters: asynchronous, synchronous and decade?

The counter counts from 0 to ___ and resets to 0 on the ___th pulse.

What precautions should I take in counters: asynchronous, synchronous and decade?

Use a slow clock (1 Hz) to see each state. Tie unused clear and preset inputs high.

Counters: asynchronous, synchronous and decade | ElectroLark