To verify the truth tables of SR, JK, D and T flip-flops, including a JK master-slave flip-flop built from NAND gates.
- ICs 7400, 7476 (JK), 7474 (D)
- Digital trainer kit with clock pulse
Theory
A flip-flop stores one bit and changes only on a clock edge. JK: J = K = 0 holds, J = 1 K = 0 sets, J = 0 K = 1 resets, J = K = 1 toggles. D: Q follows D on the clock edge. T: toggles when T = 1. The master-slave arrangement stops the JK from toggling many times (race-around) while the clock is high.
Read the lesson: Flip flops counters ›- JK: J, K from switches; clock from the trainer's pulse; Q and Q′ to LEDs; preset and clear high
Procedure
Pre-lab check
4 questions · 75% to be readyTry the readings before the lab
| J | K | Q(n+1) | Action |
|---|---|---|---|
| 0 | 0 | Q(n) | Hold |
| 0 | 1 | 0 | Reset |
| 1 | 0 | 1 | Set |
| 1 | 1 | Q′(n) | Toggle |
Precautions
- Debounce manual clock switches, or use the trainer's pulser.
- Keep preset and clear inactive (high) during normal operation.
My readings
Type what you measured. It goes into your record book, and to My Garage when you are signed in.
| S. No. | J | K | Q(n+1) | Action |
|---|---|---|---|---|
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 4 | ||||
| 5 | ||||
| 6 |
Check my readings
Put the value you set in the first column, then compare. Real parts have tolerance.
The truth tables of the SR, JK, D and T flip-flops are verified.
Everything above is free. The print-ready write-up comes with Maker.
Printed pages leave the observation table empty for your own readings.
Viva questions
Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.
Quick answers for your record and viva
What is the aim of the flip-flops: sr, jk, d and t experiment?
To verify the truth tables of SR, JK, D and T flip-flops, including a JK master-slave flip-flop built from NAND gates.
What apparatus is needed for flip-flops: sr, jk, d and t?
ICs 7400, 7476 (JK), 7474 (D), Digital trainer kit with clock pulse.
What is the theory behind flip-flops: sr, jk, d and t?
A flip-flop stores one bit and changes only on a clock edge. JK: J = K = 0 holds, J = 1 K = 0 sets, J = 0 K = 1 resets, J = K = 1 toggles. D: Q follows D on the clock edge. T: toggles when T = 1. The master-slave arrangement stops the JK from toggling many times (race-around) while the clock is high.
What result should I get in flip-flops: sr, jk, d and t?
The truth tables of the SR, JK, D and T flip-flops are verified.
What precautions should I take in flip-flops: sr, jk, d and t?
Debounce manual clock switches, or use the trainer's pulser. Keep preset and clear inactive (high) during normal operation.
