To build a mod-N counter with flip-flops (or a decade counter IC) and verify its count sequence.
- ICs 7476 (JK), 7490 (decade counter), 7400
- Digital trainer kit
- LEDs or a 7-segment display with decoder
Theory
A ripple (asynchronous) counter clocks each flip-flop from the previous one's output, so it is simple but slow. A synchronous counter clocks all flip-flops together. A mod-N counter resets to 0 when the count reaches N, using a NAND gate on the bits that are 1 at N to drive the clear inputs. The 7490 counts 0–9 when its QA output feeds the B clock input.
Read the lesson: Flip flops counters ›- Ripple: clock into the first JK (J = K = 1); each Q into the next flip-flop's clock
- Mod-N: NAND of the outputs that are 1 at N, into all clear inputs
Procedure
Pre-lab check
4 questions · 75% to be readyTry the readings before the lab
| Clock | Q3 | Q2 | Q1 | Q0 | Count |
|---|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 0 | 0 |
| 1 | 0 | 0 | 0 | 1 | 1 |
| 2 | 0 | 0 | 1 | 0 | 2 |
| 3 | 0 | 0 | 1 | 1 | 3 |
| 4 | 0 | 1 | 0 | 0 | 4 |
| 5 | 0 | 1 | 0 | 1 | 5 |
| 6 | 0 | 1 | 1 | 0 | 6 |
| 7 | 0 | 1 | 1 | 1 | 7 |
| 8 | 1 | 0 | 0 | 0 | 8 |
| 9 | 1 | 0 | 0 | 1 | 9 |
| 10 | 0 | 0 | 0 | 0 | 0 |
Precautions
- Use a slow clock (1 Hz) to see each state.
- Tie unused clear and preset inputs high.
My readings
Type what you measured. It goes into your record book, and to My Garage when you are signed in.
| S. No. | Clock | Q3 | Q2 | Q1 | Q0 | Count |
|---|---|---|---|---|---|---|
| 1 | ||||||
| 2 | ||||||
| 3 | ||||||
| 4 | ||||||
| 5 | ||||||
| 6 |
Check my readings
Put the value you set in the first column, then compare. Real parts have tolerance.
The counter counts from 0 to ___ and resets to 0 on the ___th pulse.
Everything above is free. The print-ready write-up comes with Maker.
Printed pages leave the observation table empty for your own readings.
Viva questions
Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.
Quick answers for your record and viva
What is the aim of the counters: asynchronous, synchronous and decade experiment?
To build a mod-N counter with flip-flops (or a decade counter IC) and verify its count sequence.
What apparatus is needed for counters: asynchronous, synchronous and decade?
ICs 7476 (JK), 7490 (decade counter), 7400, Digital trainer kit, LEDs or a 7-segment display with decoder.
What is the theory behind counters: asynchronous, synchronous and decade?
A ripple (asynchronous) counter clocks each flip-flop from the previous one's output, so it is simple but slow. A synchronous counter clocks all flip-flops together. A mod-N counter resets to 0 when the count reaches N, using a NAND gate on the bits that are 1 at N to drive the clear inputs. The 7490 counts 0–9 when its QA output feeds the B clock input.
What result should I get in counters: asynchronous, synchronous and decade?
The counter counts from 0 to ___ and resets to 0 on the ___th pulse.
What precautions should I take in counters: asynchronous, synchronous and decade?
Use a slow clock (1 Hz) to see each state. Tie unused clear and preset inputs high.
