Lab / AKTU / Digital electronics / Experiment 4

Multiplexer (4:1 and 8:1) and realising a function with it

Digital electronicsVirtual readings4 viva questionsRecord book ready
Aim

To verify the operation of a 4:1 multiplexer and use an 8:1 multiplexer to realise a Boolean function.

Apparatus
  • ICs 74153 (dual 4:1) and 74151 (8:1)
  • Digital trainer kit
ABY

Theory

A multiplexer routes one of 2ⁿ data inputs to its output, chosen by n select lines. Any function of n + 1 variables can be built on a 2ⁿ:1 multiplexer by using n variables on the selects and feeding each data input with 0, 1, the last variable or its complement.

Read the lesson: Logic gates ›
Circuit connections
  • 74153: select lines S1 S0 to switches, I0–I3 to switches, enable (G) low, output to an LED

Procedure

Pre-lab check

4 questions · 75% to be ready
1Why is a multiplexer called a data selector?
2How many select lines for a 16:1 multiplexer?
3What is a demultiplexer?
4How is a function of 4 variables made on an 8:1 MUX?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
S1S0SelectedY
00I00
01I11
10I21
11I30

Precautions

  • Hold the enable pin low (active-low).
  • Do not leave select lines floating.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.S1S0SelectedY
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book
Result

The output follows the data input chosen by the select lines. The function was realised on an 8:1 multiplexer and verified.

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva questions

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. Why is a multiplexer called a data selector?
2. How many select lines for a 16:1 multiplexer?
3. What is a demultiplexer?
4. How is a function of 4 variables made on an 8:1 MUX?

Quick answers for your record and viva

What is the aim of the multiplexer (4:1 and 8:1) and realising a function with it experiment?

To verify the operation of a 4:1 multiplexer and use an 8:1 multiplexer to realise a Boolean function.

What apparatus is needed for multiplexer (4:1 and 8:1) and realising a function with it?

ICs 74153 (dual 4:1) and 74151 (8:1), Digital trainer kit.

What is the theory behind multiplexer (4:1 and 8:1) and realising a function with it?

A multiplexer routes one of 2ⁿ data inputs to its output, chosen by n select lines. Any function of n + 1 variables can be built on a 2ⁿ:1 multiplexer by using n variables on the selects and feeding each data input with 0, 1, the last variable or its complement.

What result should I get in multiplexer (4:1 and 8:1) and realising a function with it?

The output follows the data input chosen by the select lines. The function was realised on an 8:1 multiplexer and verified.

What precautions should I take in multiplexer (4:1 and 8:1) and realising a function with it?

Hold the enable pin low (active-low). Do not leave select lines floating.

Multiplexer (4:1 and 8:1) and realising a function with it