NRF52840 dongle
USB stick for Bluetooth LE, Thread and Zigbee development.
RadioBluetooth 5, 802.15.4
Band2.4 GHz
InterfaceUSB
Supply voltageUSB 5 V
WirelessReviewedMPN PCA10059Used in 3 projects
In short
What is the NRF52840 dongle and what is it used for?
USB stick for Bluetooth LE, Thread and Zigbee development. Makers use it for BLE sniffing and Thread.
How it works
A Nordic nRF52840 with Bluetooth 5 and 802.15.4 on a USB stick.
Key specifications
| Wireless module spec | Value |
|---|---|
| Radio | Bluetooth 5, 802.15.4 |
| Band | 2.4 GHz |
| Interface | USB |
| Supply voltage | USB 5 V |
Pinout
USBPower and data
RESETSideways button, press to enter the bootloader (red LED pulses)
Pads15 GPIO on castellated edges
How to use it
Program it with nRF Connect Programmer over USB. Common uses are a Bluetooth LE sniffer, an OpenThread radio co-processor for Home Assistant and a Zigbee coordinator.
Applications
BLE sniffing and Thread
Builds that use it
Alternatives
- ESP32-H2 DevKitM-1Thread and Zigbee dev board
- XBee 3 moduleCertified Zigbee module
Common questions
What is the NRF52840 dongle used for?
In maker projects: BLE sniffing and Thread.
How does the NRF52840 dongle work?
A Nordic nRF52840 with Bluetooth 5 and 802.15.4 on a USB stick.
What voltage does the NRF52840 dongle need?
USB 5 V.
How do I connect the NRF52840 dongle to an Arduino or ESP32?
USB. Pins: USB (Power and data), RESET (Sideways button, press to enter the bootloader (red LED pulses)), Pads (15 GPIO on castellated edges).
What can I use instead of the NRF52840 dongle?
ESP32-H2 DevKitM-1 and XBee 3 module.
