Water level sensor (non-contact, XKC-Y25)
Senses liquid level through a plastic tank wall.
MeasuresLiquid present at sensor height
InterfaceDigital out
Supply voltage5 to 24 V
SensorsReviewedMPN XKC-Y25-VUsed in 5 projects
In short
What is the Water level sensor (non-contact, XKC-Y25) and what is it used for?
Senses liquid level through a plastic tank wall. Makers use it for tank levels without touching water.
How it works
It senses the capacitance change when water is present on the other side of the wall.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Liquid present at sensor height |
| Interface | Digital out |
| Supply voltage | 5 to 24 V |
Pinout
Brown5 to 24 V
BlueGround
YellowOutput
BlackMode select (some versions)
How to use it
Stick it on the outside of a plastic or glass tank up to about 20 mm thick. It does not work through metal tanks. Use one at each level you want to detect.
Applications
Tank levels without touching water
Builds that use it
Alternatives
- Float switch (vertical)Cheaper, needs to be inside the tank
Common questions
What is the Water level sensor (non-contact, XKC-Y25) used for?
In maker projects: tank levels without touching water.
How does the Water level sensor (non-contact, XKC-Y25) work?
It senses the capacitance change when water is present on the other side of the wall.
What voltage does the Water level sensor (non-contact, XKC-Y25) need?
5 to 24 V.
How do I connect the Water level sensor (non-contact, XKC-Y25) to an Arduino or ESP32?
Digital out. Pins: Brown (5 to 24 V), Blue (Ground), Yellow (Output), Black (Mode select (some versions)).
What can I use instead of the Water level sensor (non-contact, XKC-Y25)?
Float switch (vertical).
