Solenoid lock 12 V
Electric door latch that unlocks while powered.
TypeSolenoid
Supply voltage12 V
CurrentAbout 0.6 to 0.8 A
ControlRelay or MOSFET with a flyback diode
Motors & ActuatorsReviewedMPN Solenoid lock 12VUsed in 9 projects
In short
What is the Solenoid lock 12 V and what is it used for?
Electric door latch that unlocks while powered. Makers use it for RFID and fingerprint door locks.
How it works
Current through the coil pulls the slanted latch back into the body.
Key specifications
| Motor or actuator spec | Value |
|---|---|
| Type | Solenoid |
| Supply voltage | 12 V |
| Current | About 0.6 to 0.8 A |
| Control | Relay or MOSFET with a flyback diode |
| Watch out for | Don't power it continuously for long |
Pinout
Red+ 12 V
Black-
How to use it
Switch it with a relay or logic-level MOSFET and a 1N4007 flyback diode. Most are made for short pulses, so do not keep them powered for long.
Applications
RFID and fingerprint door locks
Builds that use it
Guided build
Keypad password door lock
Guided build
Fingerprint door lock
Guided build
Smart locker with PIN and log
Guided build
NFC tag door lock
Idea
Campus gate ID system
Idea
QR visitor entry
Idea
Door unlock by tapping a phone (NFC)
Idea
Face recognition door entry on Raspberry Pi
Showing 8 of 9
Alternatives
- Push-pull solenoid 12 VPlain linear solenoid
Common questions
What is the Solenoid lock 12 V used for?
In maker projects: RFID and fingerprint door locks.
How does the Solenoid lock 12 V work?
Current through the coil pulls the slanted latch back into the body.
What voltage does the Solenoid lock 12 V need?
12 V.
What can I use instead of the Solenoid lock 12 V?
Push-pull solenoid 12 V and Relay module 1-channel 12 V.
