Sensors
RPLIDAR A1 360° laser scanner
Spinning LiDAR that maps a room in 2D.
Distance all aroundMeasures
0.15 to 12 mRange
UART via USB adapterInterface
5 VSupply voltage
Get this part
In short
What is the RPLIDAR A1 360° laser scanner and what is it used for?
Spinning LiDAR that maps a room in 2D. Makers use it for SLAM robots with ROS.
How it works
A rotating laser triangulation sensor measures distance in every direction about 5 to 10 times a second.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Distance all around |
| Range | 0.15 to 12 m |
| Interface | UART via USB adapter |
| Supply voltage | 5 V |
Pinout
USB adapterPower and data to a computer
MotorMotor control (PWM)
UARTTX and RX at 115200 baud
How to use it
Plug it into a Raspberry Pi or laptop through the supplied adapter and use the Slamtec SDK or the ROS rplidar package to build maps with SLAM.
Applications
SLAM robots with ROS
Builds that use it
Alternatives
- Laser distance sensor (TF-Luna LiDAR)Single-direction distance
Common questions
What is the RPLIDAR A1 360° laser scanner used for?
In maker projects: SLAM robots with ROS.
How does the RPLIDAR A1 360° laser scanner work?
A rotating laser triangulation sensor measures distance in every direction about 5 to 10 times a second.
What voltage does the RPLIDAR A1 360° laser scanner need?
5 V.
How do I connect the RPLIDAR A1 360° laser scanner to an Arduino or ESP32?
UART via USB adapter. Pins: USB adapter (Power and data to a computer), Motor (Motor control (PWM)), UART (TX and RX at 115200 baud).
What can I use instead of the RPLIDAR A1 360° laser scanner?
Laser distance sensor (TF-Luna LiDAR).
