Idea
In short
How do you build a bench room scanner?
A spinning laser scanner draws a map of the room outline on a computer, a first step to robot mapping. You need RPLIDAR A1 360° laser scanner, Raspberry Pi 4 Model B (4 GB), SanDisk microSD card 32 GB (A1, Class 10) and Raspberry Pi 27 W USB-C power supply.
- Level
- Advanced
- Time
- About 330 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Scan a room outline.
Parts list
- Sensors
- Single Board Computers
- SBC Accessories
- SBC Accessories
How to build it
- Set up the Pi
- Connect the scanner by USB
- Read scan data
- Plot the outline
- Move the scanner and compare
Common questions
What parts do I need for the bench room scanner?
RPLIDAR A1 360° laser scanner, Raspberry Pi 4 Model B (4 GB), SanDisk microSD card 32 GB (A1, Class 10) and Raspberry Pi 27 W USB-C power supply.
How long does the bench room scanner take to build?
About 330 minutes for a advanced maker.
