Idea
In short
How do you build a 2D room mapper with lidar?
A spinning lidar draws a floor plan of a room as you carry it around. You need Raspberry Pi 5, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply and RPLIDAR A1 360° laser scanner.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Plot distance scans as a map.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
- Sensors
How to build it
- Connect the RPLIDAR over USB
- Read 360° scans
- Plot points in x, y
- Move and stitch scans
- Save a map image
Common questions
What parts do I need for the 2D room mapper with lidar?
Raspberry Pi 5, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply and RPLIDAR A1 360° laser scanner.
How long does the 2D room mapper with lidar take to build?
About 300 minutes for a advanced maker.
