Components / Resistors / Resistor 10 kΩ
Passives · Resistors

Resistor 10 kΩ

Provides resistance for biasing and voltage division.

10 kΩ (brown, black, orange, gold)Value
±5 % carbon film, ±1 % metal filmTolerance
0.25 WPower rating
Axial through-holePackage
4-band: brown black orange gold; 5-band: brown black black red brownMarking
ReviewedMade by GenericMPN CF 1/4 W 10 kΩ 5%Used in 476 projects
Get this part
In short

What is the Resistor 10 kΩ and what is it used for?

Provides resistance for biasing and voltage division. Makers use it for button pull-up experiments.

In the real world

Button interfaces and sensor circuits

How it works

Passive components shape current, voltage, timing and filtering behavior. Selection depends on value, tolerance, power rating and construction.

Key specifications

Passive component specValue
Value10 kΩ (brown, black, orange, gold)
Tolerance±5 % carbon film, ±1 % metal film
Power rating0.25 W
PackageAxial through-hole
Marking4-band: brown black orange gold; 5-band: brown black black red brown

Pinout

Either leadResistors have no polarity

How to use it

The usual pull-up or pull-down for buttons, the pull-up for a DHT22 data line, and one half of a divider for an LDR or thermistor.

// Button to GND with a 10 kΩ pull-up to 5 V on D2
void setup() { Serial.begin(9600); pinMode(2, INPUT); }
void loop() { Serial.println(digitalRead(2) == LOW ? "pressed" : "up"); delay(200); }

Applications

Alternatives

Buy at

Common questions

What is the Resistor 10 kΩ used for?

In products: button interfaces and sensor circuits. In maker projects: button pull-up experiments.

How does the Resistor 10 kΩ work?

Passive components shape current, voltage, timing and filtering behavior. Selection depends on value, tolerance, power rating and construction.

What can I use instead of the Resistor 10 kΩ?

Resistor 1 kΩ.