Relay 5 V SPDT (sugar cube)
The relay found on most relay modules.
Colour / typeSPDT relay, 5 V coil about 70 mA
Contact rating10 A 250 V AC / 10 A 30 V DC contacts
PackagePCB mount
PolarityCoil has no polarity, add a flyback diode
SwitchesReviewedMPN SRD-05VDC-SL-CUsed in 2 projects
In short
What is the Relay 5 V SPDT (sugar cube) and what is it used for?
The relay found on most relay modules. Makers use it for custom relay boards.
How it works
Current in the coil pulls an armature that moves the common contact from NC to NO.
Key specifications
| LED and switch spec | Value |
|---|---|
| Colour / type | SPDT relay, 5 V coil about 70 mA |
| Contact rating | 10 A 250 V AC / 10 A 30 V DC contacts |
| Package | PCB mount |
| Polarity | Coil has no polarity, add a flyback diode |
Pinout
CoilTwo pins, no polarity
COMCommon
NONormally open
NCNormally closed
How to use it
The coil draws about 70 mA, so drive it with an NPN transistor such as the BC547 and put a 1N4007 across the coil. Or buy a relay module with the driver built in.
Applications
Custom relay boards
Builds that use it
Alternatives
- Relay Module 5VModule with driver
- Solid state relay module 2-channel (G3MB-202P)Silent, AC only
Common questions
What is the Relay 5 V SPDT (sugar cube) used for?
In maker projects: custom relay boards.
How does the Relay 5 V SPDT (sugar cube) work?
Current in the coil pulls an armature that moves the common contact from NC to NO.
What can I use instead of the Relay 5 V SPDT (sugar cube)?
Relay Module 5V and Solid state relay module 2-channel (G3MB-202P).
