Projects / Plant growth time-lapse camera

Plant growth time-lapse camera

Beginner1 hGuided buildReviewed

Build it step by step

0 of 5 done
  1. Pi ZeroRASPBERRSANDIS

    Set up headless

    In Raspberry Pi Imager set the Wi-Fi, user name and SSH before writing the card, so you never need a screen.

  2. Pi ZeroRASPBERR

    Fit the camera

    Use the narrower Zero camera cable. Contacts face the board on the Zero.

  3. Pi Zero

    Test

    SSH in and run rpicam-still -o test.jpg, then copy it to your laptop to check focus and framing.

  4. Pi Zero

    Set the scene

    Put the pot against a plain wall with steady light (a desk lamp on a timer helps at night).

  5. Pi Zero

    Run for days

    Start the script, check a frame each day, then build the video with the ffmpeg command.

In short

How do you build a plant growth time-lapse camera?

A Raspberry Pi Zero 2 W with a camera takes a photo every 10 minutes for days, then ffmpeg joins them into a time-lapse video of a seed sprouting. You need Raspberry Pi Zero 2 W, Raspberry Pi Camera Module 3, SanDisk microSD card 32 GB (A1, Class 10), 5 V 2 A USB adapter and USB A to micro-USB cable (data). It takes 5 steps and about 60 minutes.

Level
Beginner
Time
About 60 min
Parts
5

Parts list

Tick what you already own. It saves to My Garage, so “Build with what I have” knows.

Wiring

FromToWhy
CameraPi Zero camera connector (narrow cable)Contacts facing the board
Micro-USB PWR IN5 V 2 A adapterPower (use the port marked PWR)

Code

Raspberry Pi OS Lite or Desktop (Bookworm). Picamera2 and ffmpeg are preinstalled. Run it as a systemd service so it survives power cuts.

# Capture:   python3 timelapse.py        (Ctrl+C to stop)
# Make video: ffmpeg -framerate 24 -i ~/timelapse/img_%05d.jpg -c:v libx264 -pix_fmt yuv420p plant.mp4
import os, time
from picamera2 import Picamera2

FOLDER = os.path.expanduser("~/timelapse")
EVERY = 600                       # seconds between photos (10 minutes)
os.makedirs(FOLDER, exist_ok=True)

cam = Picamera2()
cam.configure(cam.create_still_configuration(main={"size": (1920, 1080)}))
cam.start()
time.sleep(2)                     # let exposure and white balance settle

n = len([f for f in os.listdir(FOLDER) if f.endswith(".jpg")])   # continue numbering after a restart
while True:
    path = os.path.join(FOLDER, f"img_{n:05d}.jpg")
    cam.capture_file(path)
    print("Saved", path)
    n += 1
    time.sleep(EVERY)

Test checklist

What you should see at each check. If a reading is far off, stop and use the troubleshooting list.

CheckExpected
rpicam-still testA sharp 1080p photo of the pot
After one hour6 new images in ~/timelapse
Storage per day144 photos, roughly 100 to 150 MB
Five days at 24 fpsAbout a 30-second video

If it does not work

Night frames are black

Add a lamp on a timer, or delete night frames before making the video.

Video flickers

Auto exposure changes between frames. Fix exposure with cam.set_controls({"AeEnable": False, "ExposureTime": 20000, "AnalogueGain": 2.0}).

Numbering restarts after a power cut

The script continues from the number of files already saved.

Still stuck? Find the fault step by step with your multimeter →

Ask Lark AI

Common questions

What parts do I need for the plant growth time-lapse camera?

Raspberry Pi Zero 2 W, Raspberry Pi Camera Module 3, SanDisk microSD card 32 GB (A1, Class 10), 5 V 2 A USB adapter and USB A to micro-USB cable (data). Raspberry Pi Camera Module 3: Use the Zero camera cable.

How long does the plant growth time-lapse camera take to build?

About 60 minutes for a beginner maker, in 5 steps.

How do I know the plant growth time-lapse camera works?

rpicam-still test: A sharp 1080p photo of the pot. After one hour: 6 new images in ~/timelapse. Storage per day: 144 photos, roughly 100 to 150 MB.

Night frames are black: what should I check?

Add a lamp on a timer, or delete night frames before making the video.

Video flickers: what should I check?

Auto exposure changes between frames. Fix exposure with cam.set_controls({"AeEnable": False, "ExposureTime": 20000, "AnalogueGain": 2.0}).

Numbering restarts after a power cut: what should I check?

The script continues from the number of files already saved.