Build it step by step
0 of 7 doneFlash Raspberry Pi OS Lite
Enable SSH and Wi-Fi in the imager.
Connect the camera
With the Pi off.
Test one photo
Run the script by hand.
Add the cron line
Every five minutes.
Fix the camera in place
Steady and level.
Let it run a day
Check the photos and the free space.
Make the video
With ffmpeg.
How do you build a time-lapse camera?
A Pi takes a photo every few minutes for weeks and turns them into a video. You need Raspberry Pi Zero 2 W, Raspberry Pi Camera Module 3, SanDisk microSD card 32 GB (A1, Class 10) and Raspberry Pi 15 W USB-C power supply. It takes 7 steps and about 90 minutes.
- Level
- Beginner
- Time
- About 90 min
- Parts
- 4
Parts list
Tick what you already own. It saves to My Garage, so “Build with what I have” knows.
Wiring
| From | To | Why |
|---|---|---|
| Camera ribbon | Pi Zero camera connector (contacts toward the board) | Camera link (use the narrow Zero cable) |
| Power supply | Pi USB power port | Power |
| SD card | Pi microSD slot | Raspberry Pi OS Lite |
Code
Raspberry Pi OS (Bookworm or newer) with Python 3. Use the Lite version without a desktop, which uses less power. Save the script as shot.py in your home folder, make it executable, and add it to cron with crontab -e and a line such as */5 * * * * /usr/bin/python3 /home/pi/shot.py, which takes a photo every five minutes. Fixing white balance and, if the light is steady, exposure, stops the flicker you see when automatic settings jump between shots. Over weeks the card fills, so check the space: a 5 megapixel photo is a few megabytes. To make the video, put all the photos in one folder on a computer and run ffmpeg -framerate 24 -pattern_type glob -i 'timelapse/*.jpg' -c:v libx264 -pix_fmt yuv420p out.mp4. Use a good power supply, because brown-outs corrupt the card, and keep the camera dry and out of direct sun. Do not point it at places where people expect privacy.
#!/usr/bin/env python3
# Takes one photo and names it by time. Run from cron every few minutes.
import datetime, os, time
from picamera2 import Picamera2
OUT = os.path.expanduser("~/timelapse")
os.makedirs(OUT, exist_ok=True)
cam = Picamera2()
cam.configure(cam.create_still_configuration())
cam.set_controls({"AwbEnable": False, "ColourGains": (1.8, 1.6)}) # fixed white balance stops the colour flicker; tune the gains
cam.start()
time.sleep(2) # let the exposure settle
name = datetime.datetime.now().strftime("%Y%m%d-%H%M%S") + ".jpg"
cam.capture_file(os.path.join(OUT, name))
cam.stop()Test checklist
What you should see at each check. If a reading is far off, stop and use the troubleshooting list.
| Check | Expected |
|---|---|
| Run by hand | One JPG appears |
| After an hour | Twelve photos |
| Colour from shot to shot | Steady, no flicker |
| Video | Plays smoothly at 24 frames per second |
If it does not work
No camera found
Check the ribbon and that the camera is enabled.
Colour flickers
Fix white balance and exposure.
Photos stop
Check the card is not full and the power is steady.
Still stuck? Find the fault step by step with your multimeter →
Common questions
What parts do I need for the time-lapse camera?
Raspberry Pi Zero 2 W, Raspberry Pi Camera Module 3, SanDisk microSD card 32 GB (A1, Class 10) and Raspberry Pi 15 W USB-C power supply.
How long does the time-lapse camera take to build?
About 90 minutes for a beginner maker, in 7 steps.
How do I know the time-lapse camera works?
Run by hand: One JPG appears. After an hour: Twelve photos. Colour from shot to shot: Steady, no flicker.
No camera found: what should I check?
Check the ribbon and that the camera is enabled.
Colour flickers: what should I check?
Fix white balance and exposure.
Photos stop: what should I check?
Check the card is not full and the power is steady.
