MQ-3 alcohol sensor module
Heated sensor that responds to alcohol vapour.
MeasuresAlcohol vapour (relative)
InterfaceAnalog plus digital
Supply voltage5 V heater
Watch out forNot a legal breathalyser
SensorsReviewedMPN MQ-3Used in 6 projects
In short
What is the MQ-3 alcohol sensor module and what is it used for?
Heated sensor that responds to alcohol vapour. Makers use it for breath alcohol demos.
How it works
A heated metal-oxide layer whose resistance falls in alcohol vapour.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Alcohol vapour (relative) |
| Interface | Analog plus digital |
| Supply voltage | 5 V heater |
| Watch out for | Not a legal breathalyser |
Pinout
VCC5 V (heater about 150 mA)
GNDGround
DODigital threshold
AOAnalog, rises with alcohol vapour
How to use it
Warm up for a few minutes and use relative changes against a clean-air baseline. It responds to many vapours such as perfume and sanitiser. Never use it to decide whether someone is fit to drive.
Applications
Breath alcohol demos
Builds that use it
Alternatives
- MQ-135 air quality sensor moduleGeneral air quality
Common questions
What is the MQ-3 alcohol sensor module used for?
In maker projects: breath alcohol demos.
How does the MQ-3 alcohol sensor module work?
A heated metal-oxide layer whose resistance falls in alcohol vapour.
What voltage does the MQ-3 alcohol sensor module need?
5 V heater.
How do I connect the MQ-3 alcohol sensor module to an Arduino or ESP32?
Analog plus digital. Pins: VCC (5 V (heater about 150 mA)), GND (Ground), DO (Digital threshold), AO (Analog, rises with alcohol vapour).
What can I use instead of the MQ-3 alcohol sensor module?
MQ-135 air quality sensor module.
