Idea
In short
How do you build a fruit bowl gas watcher?
A gas sensor in a covered bowl shows how readings change as fruit ripens over days. You need Arduino Nano, MQ-3 alcohol sensor module, DHT22 Sensor, DS3231 RTC module, MicroSD Card Module and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Log slow chemical changes over time.
Parts list
- Development Boards
- Sensors
- Sensors
- Sensors
- Interfaces
- Prototyping
How to build it
- Warm up the sensor
- Record a baseline in clean air
- Log readings every ten minutes
- Compare with temperature
- Plot the days afterwards
Common questions
What parts do I need for the fruit bowl gas watcher?
Arduino Nano, MQ-3 alcohol sensor module, DHT22 Sensor, DS3231 RTC module, MicroSD Card Module and Breadboard 830 Tie Points.
How long does the fruit bowl gas watcher take to build?
About 240 minutes for a intermediate maker.
