Idea
In short
How do you build a pico twelve-key touch piano?
A Pico reads twelve touch pads from an MPR121 and plays the matching note on a passive buzzer, one octave. Keep the volume modest. You need Raspberry Pi Pico H, MPR121 capacitive touch sensor, Passive buzzer, Resistor 330 Ω and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Play notes from capacitive touch pads.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Passives
- Prototyping
How to build it
- Wire the touch board on I2C
- Wire foil pads to its pins
- Read the touch bits
- Map each pad to a note
- Play while a pad is touched
Related projects
Common questions
What parts do I need for the pico twelve-key touch piano?
Raspberry Pi Pico H, MPR121 capacitive touch sensor, Passive buzzer, Resistor 330 Ω and Breadboard 830 Tie Points.
How long does the pico twelve-key touch piano take to build?
About 150 minutes for a intermediate maker.
