Idea
In short
How do you build a black Pill mini oscilloscope?
A Black Pill samples an analog input with its ADC and draws the waveform on an ILI9341 colour TFT, with a trigger and a time scale knob. Inputs from 0 to 3.3 V only; never connect mains or anything above the limit. You need STM32 Black Pill (STM32F411CEU6), ILI9341 TFT Module, Potentiometer 10 kΩ and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 220 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See a small low-voltage signal on a screen.
Parts list
- Development Boards
- Displays
- Passives
- Prototyping
How to build it
- Wire the display over SPI
- Sample the input with a timer
- Find a rising edge trigger
- Draw the trace and grid
- Set the time scale with the knob
Common questions
What parts do I need for the black Pill mini oscilloscope?
STM32 Black Pill (STM32F411CEU6), ILI9341 TFT Module, Potentiometer 10 kΩ and Breadboard 830 Tie Points.
How long does the black Pill mini oscilloscope take to build?
About 220 minutes for a advanced maker.
