Idea
In short
How do you build a video doorbell with phone notification?
Pressing the doorbell takes a photo with an ESP32-CAM and sends it to your phone through a Telegram bot. You need ESP32-CAM, ESP32-CAM-MB programmer board, Push button 16 mm metal (momentary, LED), 5 V 2 A USB adapter and ABS project box (100 × 60 × 25 mm).
- Level
- Advanced
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Capture a photo on a button press and send it to a web API over HTTPS.
Parts list
- Development Boards
- Interfaces
- Switches
- Power
- Mechanical & Hardware
How to build it
- Create a Telegram bot with BotFather and note its token and your chat ID
- Wire the doorbell button to a free GPIO with pull-up
- On press, capture a JPEG and post it to the sendPhoto API
- Light the button ring while sending
- Mount under a small roof to keep rain off
Common questions
What parts do I need for the video doorbell with phone notification?
ESP32-CAM, ESP32-CAM-MB programmer board, Push button 16 mm metal (momentary, LED), 5 V 2 A USB adapter and ABS project box (100 × 60 × 25 mm).
How long does the video doorbell with phone notification take to build?
About 180 minutes for a advanced maker.
