Idea
In short
How do you build a person detection on ESP32-CAM?
An ESP32-CAM runs a tiny person-detection model and only sends a photo when a person is in view. You need ESP32-CAM, ESP32-CAM-MB programmer board and 5 V 2 A USB adapter.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Run a vision model on a very small board.
Parts list
- Development Boards
- Interfaces
- Power
How to build it
- Flash a person-detection example
- Capture grayscale frames at 96 × 96
- Run the model on each frame
- Send a photo to Telegram when a person appears
- Measure frames per second
Common questions
What parts do I need for the person detection on ESP32-CAM?
ESP32-CAM, ESP32-CAM-MB programmer board and 5 V 2 A USB adapter.
How long does the person detection on ESP32-CAM take to build?
About 180 minutes for a intermediate maker.
