Idea
In short
How do you build a cheap Yellow Display smart home panel?
The ESP32 board with a built-in 2.8-inch touchscreen becomes a wall panel with buttons for lights and readings from sensors. You need ESP32 2.8 inch display board (CYD, ESP32-2432S028), 5 V 2 A USB adapter and USB A to micro-USB cable (data).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a touch interface with a UI library.
Parts list
- Displays
- Power
- Cables & Wires
How to build it
- Set up the display and touch drivers
- Design screens with a UI library such as LVGL
- Add buttons that send MQTT messages
- Show sensor values on cards
- Dim the backlight when idle
Common questions
What parts do I need for the cheap Yellow Display smart home panel?
ESP32 2.8 inch display board (CYD, ESP32-2432S028), 5 V 2 A USB adapter and USB A to micro-USB cable (data).
How long does the cheap Yellow Display smart home panel take to build?
About 240 minutes for a intermediate maker.
