Projects / Ideas / Handwritten digit recogniser

Handwritten digit recogniser

IntermediateEdge AIIdeaReviewed
In short

How do you build a handwritten digit recogniser?

Draw a digit on a touchscreen and a tiny model on the ESP32 recognises it, like the classic MNIST demo. You need ESP32 2.8 inch display board (CYD, ESP32-2432S028).

Level
Intermediate
Time
About 240 min
Parts
1
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Run an image model on input you draw.

How to build it

  1. Capture touch points into a 28 × 28 grid
  2. Centre and scale the drawing
  3. Run a small MNIST model
  4. Show the answer and confidence
  5. Add a clear button

Related projects

Common questions

What parts do I need for the handwritten digit recogniser?

ESP32 2.8 inch display board (CYD, ESP32-2432S028).

How long does the handwritten digit recogniser take to build?

About 240 minutes for a intermediate maker.