ESP-01S Wi-Fi module
Smallest ESP8266 board with 2 usable GPIO. Needs a 3.3 V supply and an adapter to program.
MicrocontrollerESP8266EX
Flash1 MB
Logic level3.3 V
Input voltage3.3 V only
Development BoardsReviewedMPN ESP-01SUsed in 2 projects
In short
What is the ESP-01S Wi-Fi module and what is it used for?
Smallest ESP8266 board with 2 usable GPIO. Needs a 3.3 V supply and an adapter to program. Makers use it for wi-Fi add-on for an Arduino, tiny relays.
How it works
An ESP8266 with 1 MB of flash, with only two GPIOs brought out.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | ESP8266EX |
| Flash | 1 MB |
| Logic level | 3.3 V |
| Input voltage | 3.3 V only |
| I/O pins | GPIO0, GPIO2 (plus TX/RX) |
| Wireless | Wi-Fi 2.4 GHz |
Pinout
3V33.3 V supply (up to 300 mA peaks)
GNDGround
EN (CH_PD)Enable (pulled up on the 01S)
RSTReset
TX RXSerial
GPIO0Pull to GND while powering up to flash
GPIO2GPIO and blue LED
How to use it
Power it from a proper 3.3 V regulator, never from an Uno's 3.3 V pin, and use a level shifter or divider on RX when wiring to 5 V boards. Flash it with esp-01-usb-adapter-ch340 or run AT firmware and control it from another board.
Applications
Wi-Fi add-on for an Arduinotiny relays
Builds that use it
Alternatives
- ESP-01 USB adapter (CH340)USB adapter for flashing and testing
- Wemos D1 Mini ESP8266More pins and USB built in
Common questions
What is the ESP-01S Wi-Fi module used for?
In maker projects: wi-Fi add-on for an Arduino, tiny relays.
How does the ESP-01S Wi-Fi module work?
An ESP8266 with 1 MB of flash, with only two GPIOs brought out.
What can I use instead of the ESP-01S Wi-Fi module?
ESP-01 USB adapter (CH340) and Wemos D1 Mini ESP8266.
