Projects / Ideas / ESP-01S door status page

ESP-01S door status page

IntermediateSecurityIdeaReviewed
In short

How do you build an ESP-01S door status page?

An ESP-01S Wi-Fi module reads a reed switch on a door and serves open or closed on a local page. The ESP-01S needs a stable 3.3 V supply and care with its boot pins. You need ESP-01S Wi-Fi module, Door reed switch MC-38, AMS1117 Voltage Regulator, Resistor 10 kΩ and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 160 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Check a door from a phone with a tiny module.

How to build it

  1. Power the module from a 3.3 V regulator
  2. Check the boot pin levels
  3. Wire the reed switch with a pull-up
  4. Join Wi-Fi with placeholder credentials
  5. Serve the status page

Related projects

Common questions

What parts do I need for the ESP-01S door status page?

ESP-01S Wi-Fi module, Door reed switch MC-38, AMS1117 Voltage Regulator, Resistor 10 kΩ and Breadboard 830 Tie Points.

How long does the ESP-01S door status page take to build?

About 160 minutes for a intermediate maker.