Components / Interface and audio modules / ESP-01 USB adapter (CH340)

ESP-01 USB adapter (CH340)

USB stick for flashing and testing ESP-01 modules.

FunctionUSB to UART with 3.3 V regulator
Supply voltageUSB
Logic level3.3 V
InterfacesReviewedMPN ESP-01 USB adapterUsed in 1 project
ESP01
In short

What is the ESP-01 USB adapter (CH340) and what is it used for?

USB stick for flashing and testing ESP-01 modules. Makers use it for ESP-01 programming.

Some need a button wired to GPIO0 to enter flash mode
How it works

A CH340 USB-serial chip with a 3.3 V regulator.

Key specifications

Interface module specValue
FunctionUSB to UART with 3.3 V regulator
Supply voltageUSB
Logic level3.3 V

Pinout

SocketESP-01 or ESP-01S
USBCH340 serial

How to use it

Basic adapters do not ground GPIO0, so add a switch or button from GPIO0 to GND for flashing, or buy the version with a PROG switch.

Applications

Alternatives

Buy at

Common questions

What is the ESP-01 USB adapter (CH340) used for?

In maker projects: ESP-01 programming.

How does the ESP-01 USB adapter (CH340) work?

A CH340 USB-serial chip with a 3.3 V regulator.

What voltage does the ESP-01 USB adapter (CH340) need?

USB.

What can I use instead of the ESP-01 USB adapter (CH340)?

ESP-01S Wi-Fi module.