Projects / Ideas / ESP-01S mini weather page

ESP-01S mini weather page

IntermediateEnvironmentIdeaReviewed
In short

How do you build an ESP-01S mini weather page?

An ESP-01S Wi-Fi module reads a DHT22 on its spare pin and serves temperature and humidity on a local page. It needs a stable 3.3 V supply and careful handling of its boot pins. You need ESP-01S Wi-Fi module, DHT22 Sensor, AMS1117 Voltage Regulator, Resistor 10 kΩ and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 160 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Serve room readings from the smallest Wi-Fi module.

How to build it

  1. Power the module from a 3.3 V regulator
  2. Check the boot pin levels
  3. Wire the sensor with a pull-up
  4. Join Wi-Fi with placeholder credentials
  5. Serve the readings page

Related projects

Common questions

What parts do I need for the ESP-01S mini weather page?

ESP-01S Wi-Fi module, DHT22 Sensor, AMS1117 Voltage Regulator, Resistor 10 kΩ and Breadboard 830 Tie Points.

How long does the ESP-01S mini weather page take to build?

About 160 minutes for a intermediate maker.