Digispark ATtiny85 USB board
Tiny ATtiny85 board that plugs straight into USB.
MicrocontrollerATtiny85
Clock16.5 MHz
Flash8 KB (about 6 KB after bootloader)
RAM512 B
Development BoardsReviewedMPN DigisparkUsed in 3 projects
In short
What is the Digispark ATtiny85 USB board and what is it used for?
Tiny ATtiny85 board that plugs straight into USB. Makers use it for USB keystroke gadgets, tiny blinkers.
How it works
An ATtiny85 with the Micronucleus USB bootloader, which bit-bangs low-speed USB in software.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | ATtiny85 |
| Clock | 16.5 MHz |
| Flash | 8 KB (about 6 KB after bootloader) |
| RAM | 512 B |
| Logic level | 5 V |
| I/O pins | 6 I/O |
Pinout
P0SDA, PWM
P1PWM and on-board LED
P2SCL, analog A1
P3USB D- (has a 1.5 kΩ pull-up)
P4USB D+, PWM
P5Reset by default (weak output)
VIN7 to 12 V
5V5 V
How to use it
Add the Digistump board package and the driver, click upload first and then plug the board in within about 60 seconds. Avoid P3 and P4 when USB is in use.
Applications
USB keystroke gadgetstiny blinkers
Builds that use it
Alternatives
- Arduino MicroReal USB and many more pins
- Arduino NanoMore pins and memory
Common questions
What is the Digispark ATtiny85 USB board used for?
In maker projects: USB keystroke gadgets, tiny blinkers.
How does the Digispark ATtiny85 USB board work?
An ATtiny85 with the Micronucleus USB bootloader, which bit-bangs low-speed USB in software.
What can I use instead of the Digispark ATtiny85 USB board?
Arduino Micro and Arduino Nano.
