Ceramic resonator 16 MHz (3-pin)
Resonator with the capacitors built in.
Value16 MHz
Tolerance±0.5 %
Package3-pin
PassivesReviewedMPN CSTLS16M0X53Used in 2 projects
In short
What is the Ceramic resonator 16 MHz (3-pin) and what is it used for?
Resonator with the capacitors built in. Makers use it for simpler ATmega boards.
How it works
A ceramic resonator with built-in load capacitors.
Key specifications
| Passive component spec | Value |
|---|---|
| Value | 16 MHz |
| Tolerance | ±0.5 % |
| Package | 3-pin |
Pinout
MiddleGND
OuterTo the two oscillator pins
How to use it
No extra capacitors needed. Accuracy is about ±0.5 percent, fine for UART but not for timekeeping.
Applications
Simpler ATmega boards
Builds that use it
Alternatives
- Crystal oscillator 16 MHz (HC-49)More precise
Common questions
What is the Ceramic resonator 16 MHz (3-pin) used for?
In maker projects: simpler ATmega boards.
How does the Ceramic resonator 16 MHz (3-pin) work?
A ceramic resonator with built-in load capacitors.
What can I use instead of the Ceramic resonator 16 MHz (3-pin)?
Crystal oscillator 16 MHz (HC-49).
