Idea
In short
How do you build a crystal against ceramic resonator?
Compare the clock accuracy of a quartz crystal and a ceramic resonator by counting seconds against a reference over several hours. You need Crystal 12 MHz, Ceramic resonator 16 MHz (3-pin), Ceramic capacitor 22 pF × 2, ATmega328P-PU (blank), DS3231 RTC module and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Compare clock sources.
Parts list
- Passives
- Passives
- Passives
- Integrated Circuits
- Sensors
- Prototyping
How to build it
- Build the chip with the crystal
- Count seconds against the RTC
- Swap in the resonator
- Repeat for a few hours
- Compare the drift in parts per million
Common questions
What parts do I need for the crystal against ceramic resonator?
Crystal 12 MHz, Ceramic resonator 16 MHz (3-pin), Ceramic capacitor 22 pF × 2, ATmega328P-PU (blank), DS3231 RTC module and Breadboard 830 Tie Points.
How long does the crystal against ceramic resonator take to build?
About 240 minutes for a intermediate maker.
