Arduino MKR WiFi 1010
MKR-format SAMD21 board with Wi-Fi and a Li-Po charger.
MicrocontrollerSAMD21 48 MHz
Flash256 KB
RAM32 KB
Logic level3.3 V
Development BoardsReviewedMPN ABX00023Used in 2 projects
In short
What is the Arduino MKR WiFi 1010 and what is it used for?
MKR-format SAMD21 board with Wi-Fi and a Li-Po charger. Makers use it for battery-powered IoT.
How it works
A SAMD21 with a NINA-W102 radio and a BQ24195 charger and power-management chip.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | SAMD21 48 MHz |
| Flash | 256 KB |
| RAM | 32 KB |
| Logic level | 3.3 V |
| Wireless | Wi-Fi, Bluetooth (NINA-W102) |
Pinout
VIN5 V
VCC3.3 V
1112SDA SCL
89 10SPI MOSI SCK MISO
1314Serial1 RX TX
JSTLiPo battery
How to use it
Use the SAMD core with WiFiNINA. The JST socket charges a 3.7 V LiPo (700 mAh or larger recommended). MKR shields stack on top. Logic is 3.3 V.
Applications
Battery-powered IoT
Builds that use it
Alternatives
- Arduino Nano 33 IoTSame chips, Nano size
- Adafruit Feather ESP32-S3Battery board with a faster chip
Common questions
What is the Arduino MKR WiFi 1010 used for?
In maker projects: battery-powered IoT.
How does the Arduino MKR WiFi 1010 work?
A SAMD21 with a NINA-W102 radio and a BQ24195 charger and power-management chip.
What can I use instead of the Arduino MKR WiFi 1010?
Arduino Nano 33 IoT and Adafruit Feather ESP32-S3.
