Tools / LC Resonant Frequency
How to work out LC resonant frequency
At one frequency an inductor's and a capacitor's reactances are equal and cancel. That is resonance, used in radios, filters and oscillators.
f0 = 1 / (2π√(LC))
Result
- Resonant frequency
- 159.2 kHz
- Characteristic impedance
- 100 Ω
What this leaves out
- Ideal lossless LC; real parts have ESR, tolerance and self-resonance.
Step by step
The working with your numbers
- Change to henries and farads
L = 10⁻⁴ H, C = 10⁻⁸ F - Multiply L × C
L × C = 10⁻¹² - Square root
√(LC) = 10⁻⁶ - Resonant frequency
f = 1 ÷ (2π × 10⁻⁶) = 159 kHz
See it
Where the two reactances cross
Does the answer make sense?
- OK: Check: at 159 kHz, XL = 2πfL = 100 Ω and Xc = 1 ÷ (2πfC) = 100 Ω. They match.
- OK: To halve the frequency you need four times the capacitance (or inductance), because of the square root.
- OK: The characteristic impedance √(L ÷ C) = 100 Ω tells you how sharply it rings with a given resistance.
Common mistakes
- Forgetting the square root, which gives a wildly wrong frequency.
- Mixing µH and nF without converting both to henries and farads.
- Ignoring stray capacitance and wiring inductance, which shift resonance at high frequencies.
Learn it, try it, build it
Calculated, not measured. Check the exact part datasheet and your real circuit before powering anything.
Just need the number? Use the LC resonant frequency calculator on Geekobot.
Common questions
How do you calculate LC resonant frequency?
f = 1 ÷ (2π × √(L × C)). 100 µH with 10 nF gives 1 ÷ (6.283 × √(1 × 10⁻¹²)) = 1 ÷ (6.283 × 10⁻⁶) ≈ 159 kHz.
What happens at resonance?
The inductor's and capacitor's reactances are equal and opposite. A series LC circuit has its lowest impedance there; a parallel LC circuit has its highest.
