Idea
In short
How do you build a formaldehyde sensor placement test?
Log a formaldehyde sensor in different rooms over several days to see how readings change with ventilation. Indicative only, not a health or safety measurement. You need Arduino Nano, ZE08-CH2O formaldehyde sensor, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See how a sensor responds to a room.
Parts list
- Development Boards
- Sensors
- Interfaces
- Sensors
- Prototyping
How to build it
- Let the sensor warm up
- Read its serial output
- Log hourly
- Open a window and compare
- Note the limits of the sensor
Common questions
What parts do I need for the formaldehyde sensor placement test?
Arduino Nano, ZE08-CH2O formaldehyde sensor, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.
How long does the formaldehyde sensor placement test take to build?
About 210 minutes for a intermediate maker.
