ZE08-CH2O formaldehyde sensor
Electrochemical formaldehyde sensor.
MeasuresFormaldehyde
Range0 to 5 ppm
InterfaceUART or analog
Supply voltage3.7 to 5.5 V
SensorsReviewedMPN ZE08-CH2OUsed in 2 projects
In short
What is the ZE08-CH2O formaldehyde sensor and what is it used for?
Electrochemical formaldehyde sensor. Makers use it for indoor air after painting.
How it works
An electrochemical cell produces a current proportional to formaldehyde concentration.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Formaldehyde |
| Range | 0 to 5 ppm |
| Interface | UART or analog |
| Supply voltage | 3.7 to 5.5 V |
Pinout
VIN3.7 to 5.5 V
GNDGround
TXDUART out
RXDUART in
DACAnalog output
How to use it
Read UART at 9600 baud; by default it sends readings every second. It needs several minutes of warm-up. Use it to see trends, for example after painting.
Applications
Indoor air after painting
Alternatives
- SGP40 VOC sensorGeneral VOCs
Common questions
What is the ZE08-CH2O formaldehyde sensor used for?
In maker projects: indoor air after painting.
How does the ZE08-CH2O formaldehyde sensor work?
An electrochemical cell produces a current proportional to formaldehyde concentration.
What voltage does the ZE08-CH2O formaldehyde sensor need?
3.7 to 5.5 V.
How do I connect the ZE08-CH2O formaldehyde sensor to an Arduino or ESP32?
UART or analog. Pins: VIN (3.7 to 5.5 V), GND (Ground), TXD (UART out), RXD (UART in), DAC (Analog output).
What can I use instead of the ZE08-CH2O formaldehyde sensor?
SGP40 VOC sensor.
