Idea
In short
How do you build a joystick wheelchair controller model?
A joystick drives two geared motors through a high-current driver with soft starts, speed limits and an emergency stop. You need Arduino Nano, Joystick module (dual axis), Cytron MDD10A dual 10 A driver, Johnson geared motor 300 RPM 12 V × 2, Emergency stop button (mushroom), 12 V 7 Ah sealed lead acid battery and Blade fuse with inline holder (car type).
- Level
- Advanced
- Time
- About 480 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Mix joystick axes into tank steering safely.
Parts list
- Development Boards
- Sensors
- Motor Drivers
- Motors & Actuators
- Switches
- Batteries
- Passives
How to build it
- Read both joystick axes
- Mix them into left and right motor speeds
- Ramp speed changes smoothly
- Cut power on the e-stop
- Build and test on a small trolley before anything else
Related projects
Common questions
What parts do I need for the joystick wheelchair controller model?
Arduino Nano, Joystick module (dual axis), Cytron MDD10A dual 10 A driver, Johnson geared motor 300 RPM 12 V × 2, Emergency stop button (mushroom), 12 V 7 Ah sealed lead acid battery and Blade fuse with inline holder (car type).
How long does the joystick wheelchair controller model take to build?
About 480 minutes for a advanced maker.
