Idea
In short
How do you build a two-wheel base straight-line trim?
Build a two-wheel base with a caster and tune each motor speed until it rolls straight over a metre. You need Arduino Nano, L9110S dual motor driver, BO motor L-type 150 RPM × 2, Robot wheel 65 mm for BO / TT motor × 2, Caster wheel (ball, metal), 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Tune a two-wheel base.
Parts list
- Development Boards
- Motor Drivers
- Motors & Actuators
- Motors & Actuators
- Mechanical & Hardware
- Batteries
- Power
- Prototyping
How to build it
- Mount the motors and wheels
- Wire the driver
- Drive both equally
- Measure the drift
- Trim one motor speed
Common questions
What parts do I need for the two-wheel base straight-line trim?
Arduino Nano, L9110S dual motor driver, BO motor L-type 150 RPM × 2, Robot wheel 65 mm for BO / TT motor × 2, Caster wheel (ball, metal), 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
How long does the two-wheel base straight-line trim take to build?
About 240 minutes for a intermediate maker.
